Hi!
I have reciver South galaxy G1. In RINEX file after static measurment markered antenna type S82X_T970B, but Antenna Calibrations here information about S82X_T970A.
How much different between S82X_T970B and S82X_T970A.?
or were possible get calibration S82X_T970B antenna type?
Hi,
You need to use DecoderGnss and send #sic,get,antenna.info.type to it to get the antenna type, use the antenna type export from it. There may be some little change with the improvement of products inside the devicer and even the same model, there may be different.
So you need to select the one export from it. This one is correct.
Best wishes.
Tao
That DecoderGnss it is some software or tool?
Hi, it is a tool to get connection with the device.
You can download it from this link:WeTransfer - Send Large Files & Share Photos Online - Up to 2GB Free.
Best Wishes.
Tao
Hi
Thank you for that software.
Can you send me some guide, how it possible made.
With best regards
Hi Sergei,
There is a easier way to get it:
1.Connect the WIFI from the device named SOUTH_(the last four number of the SN), example SOUTH_1234. Then open a brower and input an address 10.1.1.
2.Then input the user name and password. They are all admin.
3.Get the antenna type from this page.
I have this one.
May be I explain wrong:
On nasa webstie " Antenna Calibrations" i find antenna calibration about “STHG1S82X_T970A”, but i need antenna calibration STHG1S82X_T970B
It is calibration STHG1S82X_T970A
1.4 G ANTEX VERSION / SYST
A PCV TYPE / REFANT
This calibration extracted from composite ngs14.atx. See COMMENT
the composite file ngs14.atx for more information. COMMENT
END OF HEADER
START OF ANTENNA
STHG1S82X_T970A NONE TYPE / SERIAL NO
FIELD NGS 2 27-OCT-15 METH / BY / # / DATE
0.0 DAZI
0.0 80.0 5.0 ZEN1 / ZEN2 / DZEN
2 # OF FREQUENCIES
NGSRA_2149 SINEX CODE
CONVERTED FROM RELATIVE NGS ANTENNA CALIBRATIONS COMMENT
G01 START OF FREQUENCY
2.46 -0.83 115.64 NORTH / EAST / UP
NOAZI 0.00 -0.13 -0.11 0.06 0.16 0.27 0.42 0.59 0.90 1.16 1.32 1.38 1.14 0.62 -0.21 -1.34 -2.77
G01 END OF FREQUENCY
G02 START OF FREQUENCY
-0.19 -2.26 104.35 NORTH / EAST / UP
NOAZI 0.00 -2.33 -3.61 -4.28 -4.59 -4.48 -4.20 -3.97 -3.72 -3.62 -3.36 -3.26 -3.33 -3.53 -3.93 -4.73 -5.58
G02 END OF FREQUENCY
END OF ANTENNA
I need this one for STHG1S82X_T970B
Hi Sergei,
I got the information from the Product development.
There is no difference from S82X_T970A and S82X_T970B. Even the L1 offset and the L2 offset is the same. The difference in naming is only distinguish the product timeline, for other functional module.
Best wishes,
Tao
It has the complete list of commands, I want to change for example the type of antenna S82X_T970A >>> STHG1S82X_T970A_NONE, and the L1/L2 offsets