Just to be sure.
The name of the board changed during the update, is that ok?
I failed to update the sensor. I tried 2x, it won’t restart at the end. The version will not change…
Hello Tomas,
It is normal for that change and it will not influence the device.
After upgrading the IMU firmware, you need to do one self-check to refresh the info.
Best Regards,
SOUTH_Tao
Hello Tao,
OK. After self-check, the version label has changed 
OEM update can be used both, 601AB and 609A9. Content the same, just for a different manufacturer(board)?
Thank you
Hello Tomas,
No, they are from the same manufacturer and be used for the same board.
Identical except firmware version and improved algorithm. Before 601AB version it called one, and from the 609A9 it called another. Don’t mind it.
Best Regards,
SOUTH_Tao
Hello Tao,
I am sending a small test. Alternatively, I’ll make a better one when I have time…
It is in clear terrain, no obstacles/trees
Trimble has less spread between individual measurements. It doesn’t have that much of an effect on the measurement.
But the main difference is around 8cm between the Trimble systems above South, the measurement then does not follow… Altitudes fit nicely! Max. 2cm.
It is not possible to supply a geoid model or something that improves the transformation to JTSK (Czech EPSG:5514)?
Thank you
Hello Tomas，
The question you mentioned i got it, We will feed back the problem of Czech coordinate system in SurvX.
We have another software SurvStar also R&D by ourselves, we improved it many times till now, also updated the Czech coordinate sytem, and easy to use, you could do a simple test if you like, the download link I attached below, the licence code of SurvStar I will send it to your E-mail, pls let me know your E-mail, Thanks!
Some of customers like FGA(Feild Genius Android), I also attached the download link, you could test it directly withouth licence code. this version had been improved after our feedback.
Thanks for you feedback!
Best Regards!
Thomas
Hello Thomas,
thank you.
I’d love to try it. My email is tom.
I compared several programs, but unfortunately, I did not test the accuracy, with them…
Best Regards
Tomas
Hello Tomas,
The licence code of SurvStar I have sent it your E-mail.
Best Regards!
Thomas
Hello Thomas_hu, can you please help me with an activation code for the survstar?
Hello Thomas,
SurvStar has better measurement results than SurvX.
Will SurvStar be SOUTH’s flagship software? Is it possible to switch from SurvX to SurvStar?
Thank you
Hi Thomas,
I need to transfer the SurvX software to another terminal. Are there procedures to follow for the transfer of the licence? Thank you.
Hi, can you share survstar apk? wetransfer link is died!
Hi Tomas. Could I ask if you have used the Czech Křovák system and especially the geoid under SurvStar? Do you have Grid and Geoid available?
Thank you for your help
Slavomir
1 Like
Hi Slavomír,
I am sending files. I didn’t notice a difference when using it, I guess it depends on the area…Grid_and_Geoid.zip (741.9 KB)
Tomas
Thank you very much. What did you do to keep SurvStar running? Apparently it will only run for a month and then it will ask for registration.
thanks Slavomir, (s.demjan zavinac seznam.cz)
can give me activation for survx 4.0
Saludos ocupo licencia para surpad y hi target
0206A94B0398BA2FA900EB-29990101 Bepur I Have Permanent Reg. Now Not Allow
0206A94B0398BA2FA900EB-29990101